Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland. Sorry, we are unable to send orders overseas.
Land Rover Defender 1983-1993 OEM Front Radius Arm Bolt Kit
Land Rover Defender 1983-1993 OEM Front Radius Arm Bolt Kit
Code: SK11
£7.00
( Excl VAT VAT £5.83)
Triple 4 original equipment front radius arm bolt kit to fit all Land Rover Defender 90 110 and 130 from 1983 to 1993 models. (from introduction up to chassis number KA930344)

Attention to detail is at the heart of everything we do and our bush and bolt kits are no exception. 

This kit uses superior Grade 10.9 high tensile grade 10.9 bolts and Grade 10 nyloc nuts for the axle bushes and Grade 10 nyloc nuts for the chassis end of the radius arm.
The nyloc nuts used in this kit are of the shallower type which gives you much better access to get a spanner in, in the tight confines of space around the radius arms, diff and anti roll bar links.
 
Rather than the common standard bright zinc plate (BZP) finish found on most fasteners, the bolts and nuts in our kit come in a far superior zinc flake finish which offers much higher corrosion resistance and longevity than BZP.
 
All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

  • 4x Triple 4 OEM Grade 10.9 High Tensile Bolts (Axle End)
  • 4x Triple 4 OEM Grade 10 Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
This kit fits Defender, Ninety, One-Ten, 90, 110, 130, 2.5 12J N/A Diesel, 2.5 19J TD, 200TDi, 2.25 Petrol, 2.5 Petrol and V8 models.
Triple 4 original equipment front radius arm bolt kit to fit all Land Rover Defender 90 110 and 130 from 1983 to 1993 models. (from introduction up to chassis number KA930344)

Attention to detail is at the heart of everything we do and our bush and bolt kits are no exception. 

This kit uses superior Grade 10.9 high tensile grade 10.9 bolts and Grade 10 nyloc nuts for the axle bushes and Grade 10 nyloc nuts for the chassis end of the radius arm.
The nyloc nuts used in this kit are of the shallower type which gives you much better access to get a spanner in, in the tight confines of space around the radius arms, diff and anti roll bar links.
 
Rather than the common standard bright zinc plate (BZP) finish found on most fasteners, the bolts and nuts in our kit come in a far superior zinc flake finish which offers much higher corrosion resistance and longevity than BZP.
 
All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

  • 4x Triple 4 OEM Grade 10.9 High Tensile Bolts (Axle End)
  • 4x Triple 4 OEM Grade 10 Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
This kit fits Defender, Ninety, One-Ten, 90, 110, 130, 2.5 12J N/A Diesel, 2.5 19J TD, 200TDi, 2.25 Petrol, 2.5 Petrol and V8 models.
Customer Reviews (0)