Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland
Land Rover Defender 1994-2002 Complete OEM Suspension Arm Bolt Kit
Code: SKW-02
£39.99
( Excl VAT VAT £33.33)
Triple 4 complete original equipment suspension arm bolt kit to fit all Land Rover Defender 90 110 and 130 models from 1994 to 2002. (from chassis number LA930456 up to chassis number 2A626645). 

This kit comes complete with all the nuts and bolts required to fit all the suspension arms. 

Attention to detail is at the heart of everything we do and our bolt kits are no exception. 

This kit uses superior Grade 10.9 high tensile grade 10.9 bolts and Grade 10 nyloc nuts*. The nyloc nuts used in this kit are of the shallower type which gives you much better access to get a spanner in, in the tight confines of space around the radius arms, diff and anti roll bar links. 

The 6 rear radius arm chassis bush bolts & nuts in this kit are the flange type. These feature integral washers and the hex heads are smaller than a standard bolts / nuts, making it so much easier to get a socket on in the tight confines of the chassis bracket.
 
Rather than the common standard bright zinc plate (BZP) finish found on most fasteners, the bolts and nuts in our kit come in a far superior zinc flake finish* which offers much higher corrosion resistance and longevity than BZP.

* Please note the rear A-frame to chassis bolts in this kit are OEM high tensile imperial bolts and nyloc nuts and are a standard BZP finish as these are unavailable in a zinc flake finish. 

All Triple 4 bolt kits are made to original equipment specification and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

Front Radius Arms
  • 4x Triple 4 OEM Grade 10.9 High Tensile Bolts (Axle End)
  • 4x Triple 4 OEM Grade 10 Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
  • 4x Triple 4 OEM Chassis Bush Retaining Washers
Rear Radius Arms
  • 2x Triple 4 OEM Imperial Bolts (Axle End)
  • 2x Triple 4 OEM Imperial Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
  • 2x Triple 4 OEM Washers (Chassis End)
  • 6x Triple 4 OEM Chassis Bush Plate Grade 10.9 Bolts, Washers & Nyloc Nuts
Panhard Rod
  • 2x Triple 4 OEM Grade 10.9 High Tensile Bolts
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts
Rear A-Frame
  • 2x Triple 4 OEM Imperial Bolts - Arm to Chassis Bush
  • 2x Triple 4 OEM Imperial Nyloc Nuts
Related part numbers BH612321 / NY612041 / NRC4516 / RYF500270 / BH116207 / BX116201L

This kit fits Defender models from 1994 to 2002. TD5, 300TDi, V8 Petrol.
Triple 4 complete original equipment suspension arm bolt kit to fit all Land Rover Defender 90 110 and 130 models from 1994 to 2002. (from chassis number LA930456 up to chassis number 2A626645). 

This kit comes complete with all the nuts and bolts required to fit all the suspension arms. 

Attention to detail is at the heart of everything we do and our bolt kits are no exception. 

This kit uses superior Grade 10.9 high tensile grade 10.9 bolts and Grade 10 nyloc nuts*. The nyloc nuts used in this kit are of the shallower type which gives you much better access to get a spanner in, in the tight confines of space around the radius arms, diff and anti roll bar links. 

The 6 rear radius arm chassis bush bolts & nuts in this kit are the flange type. These feature integral washers and the hex heads are smaller than a standard bolts / nuts, making it so much easier to get a socket on in the tight confines of the chassis bracket.
 
Rather than the common standard bright zinc plate (BZP) finish found on most fasteners, the bolts and nuts in our kit come in a far superior zinc flake finish* which offers much higher corrosion resistance and longevity than BZP.

* Please note the rear A-frame to chassis bolts in this kit are OEM high tensile imperial bolts and nyloc nuts and are a standard BZP finish as these are unavailable in a zinc flake finish. 

All Triple 4 bolt kits are made to original equipment specification and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

Front Radius Arms
  • 4x Triple 4 OEM Grade 10.9 High Tensile Bolts (Axle End)
  • 4x Triple 4 OEM Grade 10 Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
  • 4x Triple 4 OEM Chassis Bush Retaining Washers
Rear Radius Arms
  • 2x Triple 4 OEM Imperial Bolts (Axle End)
  • 2x Triple 4 OEM Imperial Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
  • 2x Triple 4 OEM Washers (Chassis End)
  • 6x Triple 4 OEM Chassis Bush Plate Grade 10.9 Bolts, Washers & Nyloc Nuts
Panhard Rod
  • 2x Triple 4 OEM Grade 10.9 High Tensile Bolts
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts
Rear A-Frame
  • 2x Triple 4 OEM Imperial Bolts - Arm to Chassis Bush
  • 2x Triple 4 OEM Imperial Nyloc Nuts
Related part numbers BH612321 / NY612041 / NRC4516 / RYF500270 / BH116207 / BX116201L

This kit fits Defender models from 1994 to 2002. TD5, 300TDi, V8 Petrol.
Customer Reviews (0)