Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland
Land Rover Discovery 1 1994-1998 Deluxe Wheel Bearing Kit - Complete Vehicle Set - Genuine Timken OEM
Land Rover Discovery 1 1994-1998 Deluxe OEM Wheel Bearing Kit Complete Vehicle Set Genuine Timken
Code: MK27-D1x4-GR
£168.15
(Ex £140.13)
Triple 4 Genuine Timken "Deluxe" complete vehicle wheel bearing kit with wheel bearing grease to fit Land Rover Discovery 1 models from 1994-1998. i.e. all 300TDi models and all V8 models with serpentine type drive belts.

This Triple 4 "Deluxe" wheel bearing kit comes complete with all the hardware required to replace all 4 wheel bearings. 

Triple 4 wheel bearing kits are the best on the market. All our wheel bearing kits use original equipment parts throughout. Timken Bearings, Corteco Oil Seals, even the lock nut washer is original equipment. Unlike a lot of sellers, who call their kits original equipment and supply you with Timken bearings which is the only bit of the kit which is original equipment. The rest of the kit been made up of cheap gaskets and rock hard cheap plastic seals.

Each Triple 4 wheel bearing kit comes with twin hub lock nuts and lock washer. 

Each kit also comes with the all important outer wheel bearing shielding washer. This is a thick washer which is fitted after the outer wheel bearing, before the hub nut (s). This washer is the same diameter as the hub bore and helps shield the bearing from contamination when operating in extreme environments.

The drive member gaskets in Triple 4 kits have not escaped the Triple 4 treatment either. We weren't happy with the OEM gaskets, these are wafer thin and split when you tighten the drive member bolts up.  So we had them made to our own design from superior grade gasket material.  To clamp up the drive member, each kit comes with 5x OEM correct grade 10.9 drive member bolts (not grade 8.8 like in a lot of other kits).

Each kit comes with an OEM circlip for the end of the C.V. joint / halfshaft, and to top off, each kit comes with a Genuine Land Rover drive member cap. Not only is this embossed with the Land Rover logo and looks cool, more importantly, the cap is made from very supple rubber with the correct sealing flange lip on the inside (no cheap rock hard plastic ones in our kits, the ones that are prone to splitting on fitting).

What's in this kit? 
  • 8x Timken Original Equipment Wheel Bearings (inner & outer)
  • 4x Corteco Original Equipment Hub Seal
  • 4x Triple 4 Engineering (better than OEM) Drive Member Gasket
  • 20x Triple 4 OEM Drive Member Bolts (Grade 10.9)
  • 2x Genuine Land Rover Drive Member Cap
  • 2x Triple 4 OEM C.V. Joint / Halfshaft Outer Circlip
  • 8x Triple 4 OEM Hub Nuts & Tab Washer 
  • 4x Triple 4 OEM Bearing Shielding Washer
  • 1x 500g Tub of Comma High Performance Wheel Bearing Grease
Related part numbers 549473 / 571751 / BX110095M / FRC8700 / FTC4785 / FTC5414 / RTC3429 / STC4382 / FTC3179 / FTC5241
Triple 4 Genuine Timken "Deluxe" complete vehicle wheel bearing kit with wheel bearing grease to fit Land Rover Discovery 1 models from 1994-1998. i.e. all 300TDi models and all V8 models with serpentine type drive belts.

This Triple 4 "Deluxe" wheel bearing kit comes complete with all the hardware required to replace all 4 wheel bearings. 

Triple 4 wheel bearing kits are the best on the market. All our wheel bearing kits use original equipment parts throughout. Timken Bearings, Corteco Oil Seals, even the lock nut washer is original equipment. Unlike a lot of sellers, who call their kits original equipment and supply you with Timken bearings which is the only bit of the kit which is original equipment. The rest of the kit been made up of cheap gaskets and rock hard cheap plastic seals.

Each Triple 4 wheel bearing kit comes with twin hub lock nuts and lock washer. 

Each kit also comes with the all important outer wheel bearing shielding washer. This is a thick washer which is fitted after the outer wheel bearing, before the hub nut (s). This washer is the same diameter as the hub bore and helps shield the bearing from contamination when operating in extreme environments.

The drive member gaskets in Triple 4 kits have not escaped the Triple 4 treatment either. We weren't happy with the OEM gaskets, these are wafer thin and split when you tighten the drive member bolts up.  So we had them made to our own design from superior grade gasket material.  To clamp up the drive member, each kit comes with 5x OEM correct grade 10.9 drive member bolts (not grade 8.8 like in a lot of other kits).

Each kit comes with an OEM circlip for the end of the C.V. joint / halfshaft, and to top off, each kit comes with a Genuine Land Rover drive member cap. Not only is this embossed with the Land Rover logo and looks cool, more importantly, the cap is made from very supple rubber with the correct sealing flange lip on the inside (no cheap rock hard plastic ones in our kits, the ones that are prone to splitting on fitting).

What's in this kit? 
  • 8x Timken Original Equipment Wheel Bearings (inner & outer)
  • 4x Corteco Original Equipment Hub Seal
  • 4x Triple 4 Engineering (better than OEM) Drive Member Gasket
  • 20x Triple 4 OEM Drive Member Bolts (Grade 10.9)
  • 2x Genuine Land Rover Drive Member Cap
  • 2x Triple 4 OEM C.V. Joint / Halfshaft Outer Circlip
  • 8x Triple 4 OEM Hub Nuts & Tab Washer 
  • 4x Triple 4 OEM Bearing Shielding Washer
  • 1x 500g Tub of Comma High Performance Wheel Bearing Grease
Related part numbers 549473 / 571751 / BX110095M / FRC8700 / FTC4785 / FTC5414 / RTC3429 / STC4382 / FTC3179 / FTC5241
Customer Reviews (0)